Samsung clp-775 Manual De Usuario

Network setup_ 27

1. Press 

 on the control panel.

2. Press up/down arrow to highlight Network and press OK.
3. Press up/down arrow to highlight Network Configuration and press 

OK.

Using this Network Configuration Report, you can find your machine MAC 

address and IP address.
For example:

•

MAC Address : 00:15:99:41:A2:78

•

IP Address : 192.0.0.192

First, you have to set up an IP address for network printing and 

managements. In most cases a new IP address will be automatically 

assigned by a DHCP (Dynamic Host Configuration Protocol) server located 

on the network.

1. Connect your machine to the network with a network cable.
2. Turned on the machine.
3. Press 

 on the control panel.

4. Press up/down arrow to highlight Network and press OK.
5. Press up/down arrow to highlight TCP/IP (IPv4) and press OK.
6. Press up/down arrow to highlight Set IP Address and press OK.
7. Press up/down arrow to highlight Manual and press OK.
8. The first available menu item, IP Address displays.

•

Enter a number between 0 and 255.

9. Use the up/down arrow to enter digits and use the left/right arrow to 

move between digits. When you finish entering the IP address, press 

OK.

10. Enter other parameters, such as the Subnet Mask or Gateway, and 

press OK.

11. After entering all parameters, press 

 to return to ready mode.

Now go to "Installing wired network connected machine’s driver" on 

page 28.

Before using the SetIP program, disable the computer firewall from 

Control Panel > Security Center > Windows Firewall.
1. Install this program from the supplied CD-ROM by double-click 

Application > SetIP > Setup.exe.

2. Follow the instructions in the installation window.
3. Connect your machine to the network with a network cable.
4. Turn on the machine.
5. From the Windows Start menu, select All Programs > Samsung 

Printers > SetIP > SetIP.

6. Click the 

 icon (third from left) in the SetIP window to open the 

TCP/IP configuration window.

7. Enter the machine’s new information into the configuration window 

as follows. In a corporate intranet, you may need to have this 

information assigned by a network manager before proceeding.

Find the machine’s MAC address from the Network 

Configuration Report (see "Printing Network Configuration 

report" on page 26) and enter it without the colons. For 

example, 00:15:99:29:51:A8 becomes 0015992951A8.

8. Click Apply, and then click OK. The machine will automatically print 

the Network Configuration Report. Confirm that all the settings are 

correct.

Before using the SetIP program, disable the computer firewall from 

System Preferences > Security > Firewall.

The following instructions may vary from your model.

1. Connect your machine to the network with a network cable.
2. Insert the Installation CD-ROM, and open the disk window, select 

MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.

3. Double-click the file and Safari will automatically open, then select 

Trust. The browser will open the SetIPapplet.html page that shows 

the printer’s name and IP address information. 

4. Click the 

 icon (third from left) in the SetIP window to open the 

TCP/IP configuration window.

5. Enter the machine’s new information into the configuration window. 

In a corporate intranet, you may need to have this information 

assigned by a network manager before proceeding.

Find the machine’s MAC address from the Network 

Configuration Report (see "Printing Network Configuration 

report" on page 26) and enter it without the colons. For 

example, 00:15:99:29:51:A8 becomes 0015992951A8.

6. Select Apply, then OK, and OK again.
7. Quit Safari.

Before using the SetIP program, disable the computer firewall from 

System Preferences or Administrator.

The following instructions may vary from your model or operating 

systems.