Samsung clp-775 Manual De Usuario

Network setup_ 28

1. Open /opt/Samsung/mfp/share/utils/.
2. Double-click the SetIPApplet.html file. 
3. Click to open the TCP/IP configuration window. 
4. Enter the machine’s new information into the configuration window. 

In a corporate intranet, you may need to have this information 

assigned by a network manager before proceeding.

Find the machine’s MAC address from the Network 

Configuration Report (see "Printing Network Configuration 

report" on page 26) and enter it without the colons. For 

example, 00:15:99:29:51:A8 becomes 0015992951A8.

5. The machine will automatically print the Network Configuration 

Report. 

You can also set up the various network settings through the network 

administration programs such as SyncThru™ Web Admin Service and 

SyncThru™ Web Service.

You may need to reset the machine to the factory default settings when 

machine that you are using is connected to new network environment.

1. Press 

 on the control panel.

2. Press up/down arrow to highlight Network and press OK.
3. Press up/down arrow to highlight Clear Settings and press OK.
4. Turn off and restart machine to apply settings.

1. Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example,

2. Click Go to access the SyncThru™ Web Service.
3. Click Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

4. Type in the ID and Password then click Login .

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

ID:  admin 

•

Password:  sec00000 

5. When the SyncThru™ Web Service window opens, click Settings 

> Network Settings > Restore Default.

6. Click Clear for network.
7. Turn off and restart machine to apply settings.

You must install the printer driver software for printing. The software 

includes drivers, applications, and other user friendly programs.
Make sure that the network setup for your machine is completed. All 

applications should be closed on your computer before beginning 

installation.

1. Make sure that the machine is connected to the network and 

powered on. Also, your machine’s IP address should have been set.

If the “Found New Hardware Wizard” appears during the 

installation procedure, click Cancel to close the window.

2. Insert the supplied software CD into your CD-ROM drive.

The software CD should automatically run and an installation window 

will appear.

3. Select Install Now.

When you click the Advanced Installation, you can use the 

Custom Installation option. The Custom Installation allows 

you to select the machine’s connection and choose individual 

components to install. Follow the instructions on the window.

4. Read License Agreement, and select I accept the terms of the 

License Agreement. Then, click Next.
The program searches for the machine.

If your machine is not found on the network or locally, an error 

message appears.

•

-

Check this option to install this program without a 

machine connected. In this case, the print a test page 

window will be skipped, and completes the installation.

•

Search again
When you press this button, the firewall notice window 

appears.

-

Turn off the firewall and Search again. For Windows 

operating system, click Start > Control Panel > 

Windows Firewall, and inactivate this option.

-

Turn off the firewall from the third party's program 

beside the operating system. Refer to the manual 

provided by individual programs.

•

Direct Input
The Direct Input allows you to search for a specific 

machine on the network.

-

Search by IP address: Enter the IP address or the host 

name. Then click Next.
To verify your machine’s IP address, print a network 

configuration report (see "Printing Network 

-

Search by network path: To find a shared machine 

(UNC Path), enter the shared name manually or find a 

shared printer by clicking the Browse button. Then click 

Next.

•

Help
If your machine is not connected to the computer or 

network, this help button gives detailed information about 

how to connect the machine.

•

SNMP Community Name
If your system administrator set the new SNMP 

Community Name on the machine, you can find the 

machine in the network. Contact your system administrator 

for new SNMP Community Name.

5. The searched machines will be shown on the screen. Select the one 

you wish to use and click OK.

If the driver searched only one machine, the confirmation