Samsung clp-775 Manual De Usuario

Network setup_ 35

below:

-

IP address: 169.254.133.43

-

Subnet Mask: 255.255.0.0 (Use the computer’s subnet 

mask.)

-

Gateway: 169.254.133.1

9. When the wireless network settings are completed, disconnect the 

USB cable between the computer and machine. Click Next.

If the Change PC Network Setting window appears, follow 

the steps in the window.
Click Next if you are finished with the computer’s wireless 

network settings.
If you set the computer’s wireless network on DHCP, it will take 

several minutes to receive the IP address.

10. The Wireless Network Setting Complete window appears.

Select Yes if you accept the current settings and continue the setup 

procedure.
Select No if you want to return to the beginning screen. 
Then, click Next.

11. Click Next when the Confirm Printer Connection window appears.
12. Select the components to be installed. Click Next.
13. After selecting the components, you can also change the machine 

name, set the machine to be shared on the network, set the machine 

as the default machine, and change the port name of each machine. 

Click Next.

14. After the installation is finished, a window asking you to print a test 

page appears. If you want to print a test page, click Print a test 

page.
Otherwise, just click Next and go to step 16.

15. If the test page prints out correctly, click Yes.

If not, click No to reprint it.

16. To register as a user of the machine in order to receive information 

from Samsung, click On-line Registration.

17. Click Finish.

•

Access point

•

Network-connected computer

•

Software CD that was provided with your machine

•

The machine installed with a wireless network interface

•

USB cable

1. Check whether the USB cable is connected to the machine.
2. Turn on your computer, access point, and machine.
3. Insert the supplied software CD into your CD-ROM drive.
4. Double-click the CD-ROM icon that appears on your Macintosh 

desktop.

5. Double-click the MAC_Installer folder.
6. Double-click the Installer OS X icon.
7. Enter the password and click OK.
8.  Click Continue.
9. Read the license agreement and click Continue.
10. Click Agree to agree to the license agreement.
11. Click Continue.

12. Select Easy Install and click Install. Easy Install is recommended 

for most users. All components necessary for machine operations 

will be installed.
If you select Custom Install, you can choose which individual 

operations will be installed.

13. Select the Wireless Setting and Installation option.
14. The software searches the wireless network.

If the search has failed, you may check if the USB cable is 

connected between the computer and machine properly, and 

follow the instructions in the window.

15. After searching, the window shows the wireless network devices. 

Select the name (SSID) of the access point you are using and click 

Next.

When you set the wireless configuration manually, click 

Advanced Setting.

•

Enter the wireless Network Name:  Enter the SSID of the 

access point you want with (SSID is case-sensitive).

•

Operation Mode:  Select Infrastructure.

•

Authentication:  Select an authentication type.
Open System:  Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key:  Authentication is used. A device that has a 

proper WEP key can access the network.
WPA Personal or WPA2 Personal:  Select this option to 

authenticate the print server based on WPA Pre-Shared 

Key. This uses a shared secret key (generally called Pre- 

Shared Key pass phrase) that is manually configured on 

the access point and each of its clients.

•

Encryption:  Select the encryption. (None, WEP64, 

WEP128, TKIP, AES, TKIP, AES)

•

Network Key:  Enter the encryption network key value.

•

Confirm Network Key:  Confirm the encryption network 

key value.

•

WEP Key Index:  If you are using WEP Encryption, select 

the appropriate WEP Key Index.

The wireless network security window appears when the 

access point has security setting.
The wireless network security window appears. The window 

may differ according to its security mode: WEP or WPA.

•

WEP
Select Open System or Shared Key for the authentication 

and enter the WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol 

preventing unauthorized access to your wireless network. 

WEP encrypts the data portion of each packet exchanged 

on a wireless network using a 64-bit or 128-bit WEP 

encryption key.

•

WPA
Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key 

that changes automatically at regular intervals. WPA also 

uses TKIP (Temporal Key Integrity Protocol) and AES 

(Advanced Encryption Standard) for data encryption.

16. The window shows the wireless network settings and check if 

settings are right. Click Next.

•