Polycom vsx7000 Manual De Referencia

Integrator’s Reference Manual for the VSX Series

4 - 198

Sets or gets the PRI call-by-call value. This command is only applicable if you 

have a PRI network interface connected to your system.

pricallbycall get
pricallbycall set {0..31}

pricallbycall set 1

returns

pricallbycall 1

Call-by-call is a number from 0 to 31, which is optionally sent to an upstream 

telephone company switch, if required. For example, specify a value of 6 for a 

T1 PRI network interface module that is directly connected to an ATT 5ESS 

switch, which is provisioned with Accunet. You must consult with the 

telephone company service provider to determine whether a call-by-call value 

is required for a particular PRI line. For most cases, the default value of 0 is 

correct. Always use the value 0 when connected to a PBX. A non-zero value 

should not be required in Europe. Values greater than 31 are reserved for 

internal use and must not be used.
User interface screen location: System > Admin Settings > Network > ISDN 

(page 3): Call-by-Call 
This screen is only accessible if you have a PRI network interface connected to 

your system.

get

Returns the current setting.

set

Sets PRI call-by-call when followed by a value from 
{0..31}. 

{0..31}

Range of call-by-call values.