Polycom vsx7000 Manual De Referencia

 System Commands

4 - 199

Sets or gets the PRI channels that will be active for the PRI line. This command 

is only applicable if you have a PRI network interface connected to your 

system.

prichannel get all
prichannel get {1..n}
prichannel set all
prichannel set {1..n} <on|off>

prichannel 1 on

prichannel 23 off

User interface screen location: System > Admin Settings > Network > ISDN 

(page 5): Active Channels
This screen is only accessible if you have a PRI network interface connected to 

your system.

Outgoing Call. For an outgoing call, the VSX system uses the first active and 

available channel starting with the lowest number from the channel range 

(1-23 for a PRI T1 and 1-30 for a PRI E1). If an additional channel is needed, the 

system chooses the next incremental number. For example, if channels 1 

through 7 are inactive, but 8 is active and available, then 8 is the first channel 

that can be used by the VSX system to place an outgoing call. If an additional 

channel is needed, the system will use the next available active channel in the 

range (which could be 9, and so on). 

get

Returns the current setting. Requires a parameter from 
<all|{1..n}>. 

all

Selects all PRI channels and returns all channels and 
settings similar to briallenable.

{1..n}

Range of available PRI channels. For PRI T1, the 
range is 1..23. For PRI E1, the range is 1..30. 

set

Sets the PRI channels to be active when followed by a 
parameter from <all|{1..n}> and from <on|off>. 

on

Activates the selected PRI channels.

off

Disables the selected PRI channels.