Polycom vsx7000 Manual De Referencia
Integrator’s Reference Manual for the VSX Series
3 - 2
Configuring the RS-232 Interface
If you use the API with a serial connection, make sure that the RS-232
interfaces of the VSX system and your computer are configured appropriately.
To access the RS-232 settings on your system, select System > Admin Settings
To access the RS-232 settings on your system, select System > Admin Settings
> General Settings > Serial Port.
Configure the Baud Rate and RS-232 Mode options as follows:
Configure the Baud Rate and RS-232 Mode options as follows:
The RS-232 port on the VSX system supports two modes: Control and
Pass-Thru.
In Control Mode, a device (for example, a computer) connected to the RS-232
In Control Mode, a device (for example, a computer) connected to the RS-232
port can control the system using the API.
In Pass-Thru Mode, the operational modes of both devices’ RS-232 ports
In Pass-Thru Mode, the operational modes of both devices’ RS-232 ports
depend on the port configuration of each device.
Option
Configure this way on your
computer
computer
Configure this way on the
VSX system
VSX system
Baud Rate
Must be the same rate for both devices. Available rates are:
9600
14400
19200
38400
57600
115200
9600
14400
19200
38400
57600
115200
RS-232 Mode
—
Control