Polycom vsx7000 Manual De Referencia
Integrator’s Reference Manual for the VSX Series
3 - 4
Using the API with a LAN Connection
If you have a computer connected to the LAN, you can send API commands
to the VSX system via Telnet port 24.
1.
On the computer, open a command line interface.
2.
Start a Telnet session using the VSX system’s IP address and port number
— for example, telnet 10.11.12.13 24.
If the VSX system has Security Mode enabled, you must use a utility that
If the VSX system has Security Mode enabled, you must use a utility that
supports Transport Layer Security (TLS), and you must provide the
remote access password.