Belkin f1dc108c Manual De Usuario

se

ct

io

n

 

41

1

2

3

4

5

6

7

WARNING! Improper use of Advanced Mode could render your Rack-Mount 
Console KVM Switch nonfunctional and incapable of receiving further updates.

When the update is complete, the “Next” button will become active, allowing the 
user to complete the update. 

If the download fails for any reason, a dialog box will appear with an option to 
retry the update. If the application has completed successfully, this screen will 
be displayed. If a reboot is required, that will be indicated on this screen. When 
you click “Finish”, the AutoUpdate application will close. When the AutoUpdate 
is complete, the seven-segment LED will display “PC”, indicating that a power 
cycle is needed to complete the update.

The Rack-Mount Console KVM Switch needs to be power-cycled (or reset) after 
a successful download, so that it can program its internal components. The 
update process will not be complete until the device has been power-cycled. 

WARNING! If the update process failed or was disrupted, DO NOT power-
cycle the device! Resetting the device at this point may cause the Rack-Mount 
Console KVM Switch to be programmed with corrupted data. This may cause 
your Rack-Mount Console KVM Switch to stop working and become incapable 
of accepting corrective updates. Try updating the device again; if this fails, then 
contact Belkin Technical Support for assistance.

Power-cycle or reset the Rack-Mount Console KVM Switch.

The internal components of the Rack-Mount Console KVM Switch will be 
reprogrammed with the new code (this may take several minutes).

When the update is complete, the Rack-Mount Console KVM Switch  
will play a series of tones, boot up automatically, and display the  
Splash Screen. The Rack-Mount Console KVM Switch is now updated 
and fully functional.