Furuno gp-150-dual Guía Del Usuario

4. NAVIGATION PLANNING 
 
 

_ _

°

Edit = Waypoint : 001

Mark :

Cmnt :

ENT: Enter

MENU: Escape

: Column

: Cursor

__

_ _._ _ _’ N  _ _ _

°

_ _._ _ _’ W

6)  Enter latitude and longitude. To enter 

34°12.345' N 135°23.456' E, for example, 
press; 

, 

3, 4, 1, 2, 3, 4, 5 

, 

1, 3, 5, 2, 3, 4, 5, 6 

To change N to S or E to W, press 

. 

7) Press  . 
8) Press   or    to select mark. 
9) Press the 

NU/CU ENT key. 

10) Enter  comment. 
11) Press the 

NU/CU ENT key twice. 

The waypoint list reappears. Waypoint 
position and date and time the waypoint was 
entered appear on the list.   

12) To enter another waypoint through the 

waypoint list, repeat steps 4-11. 

13) Press  the 

MENU ESC key to finish. 

Waypoints are mutually edited when the 
navigators are sharing data. 
 
1) Press 

WPT RTE and 4. 

2) Press   or    to select waypoint to 

edit. 

3) Press  .  
4)  Edit the contents of the waypoint. 
5) Press the 

NU/CU ENT key. The message 

shown in Figure 4-12 appears if the 
waypoint is currently selected as 
destination, is part of a route, or is in the 
route currently selected as destination. 

This wpt is GOTO
This wpt is in registered route
This wpt is in selected route

1st line

Are you sure to change ?

ENT: Yes

MENU: No

 
6) Press the 

NU/CU ENT key.   

Enter new data, referring to "4.1 Entering 
Waypoints". 

7) Press the 

MENU ESC key.   

 
 

Waypoints are mutually erased when the 
navigators are sharing data. 
 

1)  Place the cursor on the waypoint to 

erase. 

2) Press the 

CLEAR key.