Furuno gp-150-dual Guía Del Usuario

6. SETTING UP VARIOUS DISPLAYS 
 
 

The demo display provides simulated 
operation of this unit. Own ship tracks, at the 
speed selected, a figure eight course, starting 
from position entered. All controls are 
operative; you may change course, enter 
marks, etc. 
 
1)  While pressing and holding down 

ENT, turn on the power. 

_ _

°

DEMO SETTING

ENT: Enter

: Column

: Cursor

_ _._ _ _’ N  _ _ _

°

_ _._ _ _’ W

 BASE POSITION

SPEED
             00.00kt

: N/S, E/W

 
2)  Key in latitude of initial position. 
3)  If necessary, press 

 to switch from 

north latitude to south latitude or vice 
versa.  

4)  Key in longitude. 
5)  If necessary, press 

 to switch from 

east longitude to west longitude or vice 
versa. 

6) Press  . 
7)  Key in speed. 
8) Press the 

NU/CU ENT key to start the 

demonstration mode. The plotter display 
appears and the demo mode begins. After 
the test results appear, the demo setting 
mode menu appears. 

9)  To quit the demo display, turn off the 

power. 

 
All tracks, marks and data entered during the 
simulation are erased and default demo 
mode settings are restored. 
 

Note: The return to the normal mode, turn off 

the power and then turn it on while 
pressing and hold down 

NU/CU ENT 

key.