Furuno gp-150-dual Guía Del Usuario
7. ALARMS
7-2
Anchor watch alarm
The anchor watch alarm sounds to warn you
that own ship is moving when it should be at
rest.
that own ship is moving when it should be at
rest.
Alarm
setting
Own ship’s
position
position
Destination
waypoint
waypoint
: Alarm range
Figure 7-4 How the anchor
watch alarm works
Before setting the anchor watch alarm, set
present position as destination waypoint,
referring to chapter 5.
1) Press
MENU ESC and 4.
2) Press to select Arrival/Anchor.
3) Press or to select Anc.
4) Press to select Alarm Range.
5) Key in alarm range (0.001-9.999 nm).
6) Press the
3) Press or to select Anc.
4) Press to select Alarm Range.
5) Key in alarm range (0.001-9.999 nm).
6) Press the
NU/CU ENT key.
7) Press the
MENU ESC key.
When own ship drifts by the range set here,
the buzzer sounds and the message "Anchor
alarm" appears.
7.3 Cross Track Error (XTE)
Alarm
The XTE alarm warns you when own ship is
off its intended course.
off its intended course.
Starting
waypoint
Own ship’s
position
Alarm
setting
Destination
waypoint
waypoint
: Alarm range
Figure 7-5 How the XTE alarm works
1) Press
MENU ESC and 4.
2) Press or to select XTE.
3) Press or to select On.
4) Press to select Alarm Range.
5) Key in alarm range (0.001-9.999 nm).
6) Press the
3) Press or to select On.
4) Press to select Alarm Range.
5) Key in alarm range (0.001-9.999 nm).
6) Press the
NU/CU ENT key.
7) Press the
MENU ESC key.
When own ship strays from the intended
track by the range set here, the buzzer
sounds and the message "Cross track error
alarm" appears.