Furuno MFD8 Guía Del Usuario
14-1
14. Maintenance, Troubleshooting
This chapter has information about maintenance and troubleshooting that the user
can follow to care for the equipment.
can follow to care for the equipment.
14.1
Maintenance
Routine maintenance helps keep your equipment in good condition and prevents fu-
ture problems. Check the items shown in the table below to help keep your equipment
in good condition for years to come.
ture problems. Check the items shown in the table below to help keep your equipment
in good condition for years to come.
Routine maintenance
Check item
Check point
Remedy
Cables
Check that all cables are fas-
tened. Check the cables for corro-
sion.
tened. Check the cables for corro-
sion.
Connect the cables that have loos-
ened. Replace any damaged ca-
bles.
ened. Replace any damaged ca-
bles.
Cabinet
Dust on the cabinet
Remove dust with a dry clean
cloth. Do not use commercial
cleaners to clean the equipment.
Those cleaners can remove paint
and markings.
cloth. Do not use commercial
cleaners to clean the equipment.
Those cleaners can remove paint
and markings.
LCD
Dust on the LCD
Wipe the LCD carefully to prevent
scratching, using tissue paper and
an LCD cleaner. To remove dirt or
salt deposits, use an LCD cleaner,
wiping slowly with tissue paper so
as to dissolve the dirt or salt.
Change paper frequently so the
salt or dirt will not scratch the LCD.
Do not use solvents such as thin-
ner, acetone or benzene for clean-
ing.
scratching, using tissue paper and
an LCD cleaner. To remove dirt or
salt deposits, use an LCD cleaner,
wiping slowly with tissue paper so
as to dissolve the dirt or salt.
Change paper frequently so the
salt or dirt will not scratch the LCD.
Do not use solvents such as thin-
ner, acetone or benzene for clean-
ing.
Radar antenna
Dirt on the radar antenna can re-
duce the sensitivity.
duce the sensitivity.
Clean the radiator (or radome) with
a cloth wetted with freshwater. Do
not use commercial cleaners to
clean the radiator. Those cleaners
can remove paint and markings.
a cloth wetted with freshwater. Do
not use commercial cleaners to
clean the radiator. Those cleaners
can remove paint and markings.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Do not open the equipment.
Only qualified persons can
work inside the equipment.
work inside the equipment.
NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to plastic
parts or equipment coating.
sealant or contact spray to plastic
parts or equipment coating.
Those items contain products that
can damage plastic parts and equip-
ment coating.
can damage plastic parts and equip-
ment coating.