Bunn ICB-TWIN Guía De Operación

Page 7

A. ON/OFF SWITCH
 

Pressing the "ON/OFF" pad will alternately turn the selected brewing side on and off. Pressing this pad during 

the brew cycle will interrupt the brew cycle, stopping the fl ow of water. Pressing this pad during programming 
of the brewer will exit the setup and return to the main screen.

B. PROGRAMMING (left)
 

This hidden pad can be used to scroll backwards through the function list while in programming mode.

C. BREW  (A,B,C)

When the ON/OFF switch is ON and the main screen is visible, momentarily pressing and releasing this pad 

will begin a brew cycle on the selected side.

D. PROGRAMMING (right)
 

Pressing and holding this pad allows entry into the programming menus. Pressing and releasing the pad 

steps through each function screen while in the programming mode.

E. BATCH SELECTOR PADS
 

Pressing the pad corresponding to the Half or Full batch selects the amount of product to be brewed on the 

selected side. Pressing a different pad after a brew cycle has been initiated does not change the brew batch in 
progress. Light indicates the selected batch to brew. Also used in programming to adjust settings on both batch 
sizes.

F. FUNCTION SCREEN
 

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

G. FUNNEL SENSING COIL
 

These are used to "receive" information from the Smart Funnel handle, recipe cards, and ad cards.

H. FUNCTION SCREEN PADS
 

These are hidden pads which are used to program the brewer when in the programming mode.

D

B

C

READY TO BREW

WATER TEMP: 200°

A

G

F

E

A

C

E

H

38112.1 042105

G