Behringer B312A Manual De Usuario
5
EUROLIVE B312A/B315A
2. Control elements and connections
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
and a standard IEC receptacle. It meets all international safety
certification requirements.
Please make sure that all equipment is properly
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cord.
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cord.
IMPORTANT NOTES CONCERNING INSTALLATION
The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the
transmitter and the device and use shielded cables
for all connections.
powerful broadcasting stations and high-frequency
sources. Increase the distance between the
transmitter and the device and use shielded cables
for all connections.
ATTENTION!
This loudspeaker is capable of producing extreme
volumes. Please keep in mind that high sound
pressures do not only temporarily damage your
sense of hearing, but can also cause permanent
hearing damage. Be careful to select a suitable
volume at all times.
volumes. Please keep in mind that high sound
pressures do not only temporarily damage your
sense of hearing, but can also cause permanent
hearing damage. Be careful to select a suitable
volume at all times.
1.1.3 Online registration
Please remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and read the terms and
conditions of our warranty carefully.
right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, contact directly one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, contact directly one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
2. Control elements and connections
Fig. 2.1: Control elements and connections (B312A and B315A)
{1}
Use this 1/4" stereo jack to connect a signal source that
has 1/4" output.
has 1/4" output.
{2}
Use this XLR connector to connect a signal source that
has XLR output.
has XLR output.
Always use either the XLR or the 1/4" jack input,
and use the LEVEL control
and use the LEVEL control
{4}
{4}
{4}
{4}
{4}
to adapt the input
sensitivity. Never use both inputs at the same time!
{3}
The LINK OUTPUT is directly connected to the inputs of the
B312A/B315A and carries the input signal with no processing
applied. In this way, you can route the signal to the input of
another device (for example, a second B312A/B315A).
B312A/B315A and carries the input signal with no processing
applied. In this way, you can route the signal to the input of
another device (for example, a second B312A/B315A).
{4}
To set the volume of the LINE or MIC signal, use the LEVEL
control. The left half of the control range is for attenuating
the LINE signal. The right half is for raising the level of the
MIC signal.
control. The left half of the control range is for attenuating
the LINE signal. The right half is for raising the level of the
MIC signal.
{5}
The CLIP LED lights up when signal distortion occurs. Reduce
the volume with the LEVEL control until the CLIP LED does
not light up any more, or occasionally lights up at signal
peaks.
the volume with the LEVEL control until the CLIP LED does
not light up any more, or occasionally lights up at signal
peaks.
We would like to draw your attention to the fact that
extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the LEVEL control fully to the left before you
switch on the unit. Be careful to select a suitable
volume at all times.
extremely loud sound levels may damage your
hearing as well as your headphones/loudspeakers.
Turn the LEVEL control fully to the left before you
switch on the unit. Be careful to select a suitable
volume at all times.
{6}
The HIGH control adjusts the high-frequency range.
{7}
Use the LOW control to raise the level of the low-frequency
range.
range.
{8}
The PWR LED lights up when the loudspeaker is put into
operation.
operation.