Behringer B312A Manual De Usuario
6
EUROLIVE B312A/B315A
3. Application examples
Fig. 2.2: Control elements and connections
(B312A and B315A)
{9}
You can replace fuses at the FUSE SWITCH of the
B312A/B315A. Always replace fuses with the same type.
Please follow the instructions given in chapter 5
“Specifications.”
B312A/B315A. Always replace fuses with the same type.
Please follow the instructions given in chapter 5
“Specifications.”
(10)
The mains connection is established using a cable with an IEC
mains connector. This cable is delivered with the
B312A/B315A. To avoid ground-loop hum, loudspeakers and
mixing consoles should be connected to the same power
circuit.
mains connector. This cable is delivered with the
B312A/B315A. To avoid ground-loop hum, loudspeakers and
mixing consoles should be connected to the same power
circuit.
(11)
Press POWER to turn on your B312A/B315A.
Attention: The POWER switch does not fully
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord completely when
the unit is not used for prolonged periods of time.
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord completely when
the unit is not used for prolonged periods of time.
(12)
SERIAL NUMBER
3. Application examples
Turn the LEVEL control fully to the left before you
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.
3.1 Using a mixing console
A common way to use 2 B312A/B315A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B312A/B315A loudspeaker.
The B312A/B315A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B312A/B315A loudspeaker.
The B312A/B315A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
3.2 Using several B312A/B315A loudspeakers
INPUT
INPUT
INPUT
INPUT
LINK OUTPUT
LINK OUTPUT
EUROLIVE B315A
Output Left
Output Right
XENYX 2442FX
Fig. 3.1: Wiring several B312A/B315A loudspeakers using
the LINK OUTPUT connector
For larger rooms, you can connect several B312A/B315A
speakers using the LINK OUTPUT connector (see fig. 3.1).
speakers using the LINK OUTPUT connector (see fig. 3.1).
3.3 Direct connection of a stereo signal source
When you use two B312A/B315A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)