TallyGenicom 930 Guía Del Usuario
E-36
Section 4
Problem:
I've installed a new ribbon and the printing is smeared and
streaked.
I've installed a new ribbon and the printing is smeared and
streaked.
Solution:
The ribbon shield is either loose or missing. Remove the
ribbon cartridge and check the ribbon shield: if it is loose,
secure it in place, if it is missing, find it and reinstall it.
The ribbon shield is either loose or missing. Remove the
ribbon cartridge and check the ribbon shield: if it is loose,
secure it in place, if it is missing, find it and reinstall it.
Problem:
The ALARM light is on and the Character Pitch 15 light is
flashing.
The ALARM light is on and the Character Pitch 15 light is
flashing.
Solution:
This indicates a paper jam. Press the SEL key and correct
the paper jam situation ( see “Clearing Paper Jams” in
Section 2).
This indicates a paper jam. Press the SEL key and correct
the paper jam situation ( see “Clearing Paper Jams” in
Section 2).
Problem:
The ALARM light is on and the Character Pitch 10 light is
flashing.
The ALARM light is on and the Character Pitch 10 light is
flashing.
Solution:
This indicates that the paper lever is set at the wrong
position for the paper you are trying to use: move it to the
proper setting.
This indicates that the paper lever is set at the wrong
position for the paper you are trying to use: move it to the
proper setting.
Problem:
The ALARM light is blinking.
The ALARM light is blinking.
Solution:
Try turning the printer off and then back on again. If the
light still blinks, call for service.
Try turning the printer off and then back on again. If the
light still blinks, call for service.
Problem:
The printer needs paper, but the ALARM light is not on and
I can not load the paper.
The printer needs paper, but the ALARM light is not on and
I can not load the paper.
Solution:
Press and release the SEL key, then hold the SHIFT key
and press the RESET (CHARACTER PITCH) key: this
resets the printer.
Press and release the SEL key, then hold the SHIFT key
and press the RESET (CHARACTER PITCH) key: this
resets the printer.
Problem:
The Print Quality and Character Pitch keys on the front
panel won't work.
The Print Quality and Character Pitch keys on the front
panel won't work.
Solution:
The Operator Panel Function in the printer menu can be
used to disable these buttons. If the printer is part of a
customized system or if it is used by a number of people,
the system manager may have used this option to make sure
the printer is always set properly.
The Operator Panel Function in the printer menu can be
used to disable these buttons. If the printer is part of a
customized system or if it is used by a number of people,
the system manager may have used this option to make sure
the printer is always set properly.
sec4.p65
10/3/97, 9:35 AM
36