KYOCERA FS-C5020N Guía De Operación
Using the Operator Panel
ADVANCED OPERATION GUIDE
2-71
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
customized.
1
Display the custom paper type (see Creating Custom Paper Type on page
2-70) and press
2-70) and press
Z.
2
Press
U or V repeatedly until >>Paper
Weight
appears.
3
Press [ENTER]. A blinking question mark
(?) appears.
(?) appears.
4
Press
U or V to display the desired paper thickness. The display changes
as shown below. For details of the default setting for each paper type, see
Paper Availability on page 1-2.
Paper Availability on page 1-2.
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
5
When the desired paper thickness is displayed, press [ENTER].
6
Press [MENU]. The display returns to Ready.
If the optional duplexer is installed on the printer, duplex printing can be
enabled and disabled. See Setting the Duplex Path on page 2-71 on the
following page.
enabled and disabled. See Setting the Duplex Path on page 2-71 on the
following page.
Setting the Duplex Path
NOTE:
To use this function, the optional duplexer must be installed on
the printer.
If the optional duplexer is installed on the printer, you can set whether or
not to enable duplex printing as follows. The default setting is Enable.
not to enable duplex printing as follows. The default setting is Enable.
1
Display the custom paper type (see Creating Custom Paper Type on page
2-70) and press
2-70) and press
Z.
2
Press
U or V repeatedly until >>Duplex
path
appears.
>>Paper Weight
Normal 1
>>Paper Weight
? Normal 1
>>Duplex path
Enable