LG OM4560 Guía Del Usuario

Descargar
Página de 38
Operating
26
Oper
ating
3
Other Operations
Turn off the sound temporarily
Press 
 on the remote control to mute your sound.
You can mute your unit, for example, to answer the 
telephone, the “MUTE” will appear in the display 
window.
To cancel it, press 
 again or change the volume 
level.
Displaying file information  
(ID3 TAG)
While playing an MP3 file containing file information, 
you can display the information by pressing
 INFO.
DEMO
In the power off state, press 
USB REC/DEMO on 
the unit once. The unit will power on and display the 
each of functions in the display window. To cancel 
the DEMO function, press 
USB REC/DEMO once 
more.
 
While in DEMO, this unit will keep DEMO 
status even if you unplug the power cord 
connection.
 
You can enjoy other functions during the 
DEMO, the DEMO will temporarily pause. 
-  Without input key in 10 sec, the DEMO will 
play back automatically.
 
,
Note
Using Microphone
1.  Connect your microphone to the MIC jack.
2.  Play the music you want.
3.  Sing along with the accompaniment. Adjust the 
microphone volume by pressing 
MIC +/- on the 
unit.
 
When not using the microphone, set the 
microphone volume to minimum by pressing 
MIC - or turn off the MIC and remove the 
microphone from the MIC jack.
 
If the microphone is set too near the speaker, 
a howling sound may be produced. In this 
case, move the microphone away from the 
speaker or decrease the sound level by using 
the 
MIC -.
 
If sound through the microphone is extremely 
loud, it may be distorted. In this case, set the 
microphone volume to minimum by pressing 
MIC -.
 
,
Note
VOICE CANCELLER
You can enjoy the function while playing the music, by 
reducing singer vocal of music in the various source. 
Press the 
VOICE CANCELLER, and “ON” will 
appear in display window.
To cancel it, press 
VOICE CANCELLER again.
The quality of the 
VOICE CANCELLER may be 
different depending on the recording conditions of 
music files.
 
This function is available CD, USB or BT 
(Bluetooth) Function.
 
If the function is not available, “NOT 
SUPPORT” appears in the display window.
 
This function is available to use only when a 
microphone is connected. 
 
If a microphone is not connected, “NOT 
SUPPORT” appears in the display window.
 
To initialize it, change the Function or 
disconnect the microphone.
 
It is not available on the MONO source.
 
This function may not be initialized depending 
on the status of connected devices.
 
,
Note