Viewsonic PJD7828HDL Manual De Usuario

48

Sets the language for the On-Screen Display (OSD) menus. 

See 

"Using the menus" on page 24

 for details.

See 

"Choosing a location" on page 13

 for details.

Menu Display Time
Sets the length of time the OSD will remain active after your 

last key press. The range is from 5 to 30 seconds in 5-second 

increments.

Menu Position
Sets the On-Screen Display (OSD) menu position.

See 

"Hiding the image" on page 37

 for details.

Allows you to select which logo screen will be displayed 

during projector start-up.

See 

"Creating your own startup screen" on page 37

 for 

details.  

Sets a hotkey on remote control.

Pattern
The projector can display several test patterns. It helps you 

adjust the image size and focus and check that the projected 

image is free from distortion.

Message
Selecting On displays the current information on the screen 

when the projector is detecting or searching for a signal.

Presentation Timer
See 

"Setting the presentation timer" on page 36

 for details.

A mode for operation in high altitude areas. See 

"Creating 

your own startup screen" on page 37

 for details.

Enables or disables the DCR (Dynamic Contrast Ratio) 

function. Selecting On enables the function and the 

projector will automatically switch the lamp mode between 

normal and economic modes according to the input image 

detected.

See 

"Adjusting the sound" on page 39

 for details.