Viewsonic PJD5553Lws Manual De Usuario
24
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time.
Be sure the Quick Auto Search function in the SOURCE menu is On if you want the
projector to automatically search for the signals.
You can also manually select the desired signal by
pressing one of the source selection keys on the
remote control, or cycle through the available input
signals.
1.
Press Source. A source selection bar is
displayed.
displayed.
2.
Press
/
until your desired signal is
selected and press Enter.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
The brightness level of the projected image will change accordingly when you switch between
different input signals. Data (graphic) "PC" presentations using mostly static images are
generally brighter than "Video" using mostly moving images (movies).
different input signals. Data (graphic) "PC" presentations using mostly static images are
generally brighter than "Video" using mostly moving images (movies).
The input signal type affects the options available for the Color Mode. See
for details.
Please see
for the native display resolution of this
projector. For best display picture results, you should select and use an input signal which
outputs at this resolution. Any other resolutions will be scaled by the projector depending
upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture
clarity. See
outputs at this resolution. Any other resolutions will be scaled by the projector depending
upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture
clarity. See
for details.
Changing HDMI input settings
In the unlikely event that you connect the projector to a device (like a DVD or Blu-ray
player) via the projector’s HDMI input and the projected picture displays wrong colors,
please change the color space to an appropriate one that fits the color space setting of the
output device.
To do this:
1.
Open the OSD menu and go to the PICTURE > HDMI Settings menu.
2.
Press Enter.
3.
Highlight HDMI Format and press
/ to select a suitable color space according
to the color space setting of the output device connected.
•
•
RGB: Sets the color space as RGB.
•
YUV: Sets the color space as YUV.
•
Auto: Sets the projector to detect the color space setting of the input signal
automatically.
automatically.
4.
Highlight HDMI Range and press
/ to select a suitable HDMI color range
according to the color range setting of the output device connected.
•
•
Enhanced: Sets the HDMI color range as 0 - 255.
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
HDMI