KitchenAid 30" Hood Liner Uso Y Cuidado

The range hood is designed to remove smoke, cooking vapors 
and odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the 
kitchen.

The hood controls are located on the center of the front of the 
range hood liner.

The On/Off light button controls all lights. Press once for On and 
again for Off.

The Blower Speed buttons turn the blower on and control the 
blower speed and sound level for quiet operation. The speed can 
be changed anytime during fan operation by pressing the desired 
blower speed button.

Press the Blower Off button a second time to turn off the blower.

IMPORTANT: Clean the hood and grease filters frequently 
according to the following instructions. Replace grease filters 
before operating hood.

To avoid damage to the exterior surface, do not use steel wool or 
soap-filled scouring pads. 

Always wipe dry to avoid water marks.

■

Liquid detergent soap and water, or all-purpose cleanser

■

Wipe with damp soft cloth or nonabrasive sponge, then rinse 
with clean water and wipe dry.

The filters should be washed frequently. Place metal filters in 
dishwasher or hot detergent solution to clean.

Let filter dry thoroughly before replacing it.

Turn off fan and lights. Allow halogen lamp to cool.

1. Remove each filter by pulling the spring release handle and 

then pulling down the filter. 

2. Wash metal filters as needed in dishwasher or hot detergent 

solution.

3. Reinstall the filter by making sure the spring release handles 

are toward the front. Insert metal grease filter into upper 
track.

4. Pull the spring release handle down.

5. Push up on metal filter and release handle to latch into place.

6. Repeat steps 1-5 for the other filter.

A

B

C

D

A

B

C

D

A