Canon PowerShot G16 Guía Del Usuario

83

z

z

Press the shutter button halfway. [ ] 

changes to a blue [ ], which follows 

the subject as the camera continues to 

adjust the focus and exposure (Servo AF) 

z

z

Press the shutter button all the way down 

to shoot.

z

z

Even after your shot, [ ] is still 

displayed and the camera continues to 

track the subject.

[Servo AF] (

Tracking may not be possible when subjects are too small or move 

too rapidly, or when subject color or brightness matches that of the 

background too closely.

[AF-Point Zoom] on the [

4] tab is not available.

[

e] is not available.

The camera can detect subjects even if you press the shutter button halfway 

without pressing the <

> button. After your shot, [

] is displayed in the 

center of the screen.

If [Face ID] is set to [On], names will not display when registered people 

However, a name will display if the subject chosen to focus on is the same as 

a person detected with Face ID.

Still Images

This mode helps avoid missing shots of subjects in motion, because the 

camera continues to focus on the subject and adjust the exposure as long 

as you press the shutter button halfway.

z

z

Press the <

n> button, choose 

[Servo AF] on the [

4] tab, and then 

z

z

The focus and exposure are maintained 

where the blue AF frame is displayed 

while you are pressing the shutter button 

halfway.

Focusing may not be possible in some shooting conditions.

In low-light conditions, Servo AF may not be activated (AF frames 

may not turn blue) when you press the shutter button halfway. In this 

case, the focus and exposure are set according to the specified AF

frame mode.

If adequate exposure cannot be obtained, shutter speeds and

aperture values are displayed in orange. Release the shutter button, 

and then press it halfway again.

AF lock shooting is not available.

[AF-Point Zoom] on the [

4] tab is not available.