Canon imagePROGRAF iPF680 Manual

Memory

Memory

256 MB

Interface

USB

Format

Internal port

Mode

Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer

Connector

Series B (4-pin)

Ethernet

Format

Internal port

Specification

IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IEEE 802.3az EEE

Protocols

SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)

Ink

For information on the types of paper the printer supports, refer to the Paper Reference Guide. 

Paper width

For information on the paper widths the printer supports, 

Minimum paper length

Rolls

203.2 mm (8.0 in)

Sheets

279.4 mm (11.0 in)

Maximum printable length (

Rolls

18 m (19.7 yd)

Sheets

1,600 mm (63.0 in)

Thickness

Rolls

0.07–0.8 mm (0.0028–0.031 in)

Sheets

0.07–0.8 mm (0.0028–0.031 in)

Roll maximum outer diameter

150 mm (6 in) or shorter

Supported paper core inner diameter

2 inches / 3 inches

Print area

For details, 

  *1: Varies depending on the operating system or application.

Roll Holder Set

Roll Holder Set RH2-26

Stand

Printer Stand ST-27

Stand(

Printer Stand ST-27

  *1: The stand that is included depends on the region where you purchased the printer.

A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.

iPF680

                                                                                                                                                                                                                       

Print Area

                                                                                                                                                                                                                             

Specifications

Printer Specifications

631