ASUS RS700-E7/RS4 Manual De Usuario

Chapter 2:  Hardware setup

2-14

The system supports four hot-swap SATAII/SAS hard disk drives. The hard disk 

drive installed on the drive tray connects to the motherboard SATAII/SAS ports via 

the SATAII/SAS backplane.
To install a hot-swap SATAII/SAS HDD:
1.  Release a drive tray by pushing the 

spring lock to the right, then pulling 

the tray lever outward. The drive tray 

ejects slightly after you pull out the 

lever.

2.  Firmly hold the tray lever and pull 

the drive tray out of the bay.

3.  Take note of the drive tray holes. 

Each side has three holes to fit 

different types of hard disk drives. 

Use two screws on each side to 

secure the hard disk drive.

4.  Place a SATAII/SAS hard disk drive 

on the tray, then secure it with four 

screws.