Canon imagePROGRAF iPF770 Manual

How rolls are cut after ejection varies depending on printer settings.

Cutting Method

Printer Setting

Driver Setting

Automatic

The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings.

Media
Menu > Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode

Choose this setting if you prefer not to have docu-
ments dropped immediately after printing, as when
waiting for ink to dry.
To cut the roll with the Cutter Unit, press the Cut but-
ton.

Choose this setting when using media that cannot be
cut using the Cutter Unit.
Cut each page from the roll using scissors. For con-
tinuous printing (if you will cut each page later), se-
lect Automatic Cutting > Yes or select Print Cut
Guideline.

No, Yes, Print
Cut Guideline

Choose this option if you want to cut pages by press-
ing Cutter Unit buttons for manual cutting after print-
ing when Automatic Cutting > No is selected or
Print Cut Guideline is selected in the printer driver.
Otherwise choose this option if you want to cut the
roll edge after loading a roll.

Cut button
pressed

No, Print Cut
Guideline

Note

Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.

With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.

Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.

Cut rolls manually in the following cases:

Eject (waiting for ink to dry after printing)

Important

When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, prin-
ted documents may be damaged.

Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quali-
ty or cause rough cut edges.

iPF770

                                                                                                                                                                          

Specifying the Cutting Method for Rolls

                                                                                                                                                                                                                             

Handling and Use of Paper

Handling rolls

369