Canon imagePROGRAF iPF830 MFP M40 Manual

The printer stops during a print job

The printer stops during a print job

Cause

Corrective Action

The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.

Remove the used roll and insert a new roll.
 (See "

Cause

Corrective Action

The leading edge of the roll paper was cut to
straighten it.

The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a
value other than Off in the Control Panel menu.
 (See "

The Printhead nozzles are clogged.

Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
 (See "

A print job was received from an incompatible
printer driver.

Use the correct imagePROGRAF printer driver for the printer and try printing again.

The printer has received print data that in-
cludes HP RTL commands when Auto Ro-
tate is On in the Control Panel menu.

In the Control Panel, set Auto Rotate to Off and print again.
 (See "

The printer is damaged.

Contact your Canon dealer for assistance.

An error message is shown on the Display Screen

                                                                                                                                                  

iPF830

                                                                                                                                                                                                                     

Troubleshooting

The printer stops during a print job

 

618