Canon VB-R11 Manual

Camera Ang

le 

S

etting T

ool

3

53

After connecting to the camera, view the displayed video to make settings, such as the camera angle and zoom.

Set the Camera Angle and Zoom

You can set the camera angle and zoom using the video display area or buttons.



Make Settings with the Operation Buttons and Sliders

You can set the camera angle with the [Pan], [Tilt] and [Rotation] buttons.

While you push a button, the camera angle will change in that direction. When you release the button, the camera 

angle will stop.

If you rotate the camera angle using the [Rotation] slider, release the mouse button when the video display area is 

horizontal.



Set Camera Angle by Clicking Video

If you click anywhere in the video display area, the camera angle will change to center on that location.

If you click outside the pan or tilt range, however, the camera angle will only change for the one which is within its 

range.

Note

If the camera moves differently than the intended operation, or if settings in the full range displayed by control assist cannot be 
made, control assist may be out of alignment with the actual camera angle. If this happens, reset the camera angle after clicking 
[Control Assist Correction].

Set the Camera Angle

Important

You will have to reconfigure Intelligent Function detection area settings, privacy mask settings, or preset settings you have already made 
on a camera, if you change settings on that camera with the Camera Angle Setting Tool.

M641 M640

 

Pans left or right.

 

Tilts up or down.

 

Rotates.

M641 M640