Canon VB-R11 Manual

54



Change the Camera Zoom Ratio

You can change the zoom ratio of the camera with the [Zoom] buttons or [Zoom] slider.

Operation will continue while you hold a [Zoom] button down and stop when you release it.

If you drag the slider handle, the camera zoom ratio will change according to the position on the slider.

If you select [Digital Zoom] > [Enable], the maximum optical telephoto icon and digital zoom range will appear and 

you will be able to use digital zoom.

The higher the digital zoom ratio, however, the lower the video quality becomes.

Set the Focus and Exposure Compensation

This focuses on the subject. Adjust exposure to suit the brightness of subjects.

Note

The exposure compensation value set with the Camera Angle Setting Tool will be reset when the camera is rebooted.



Set the Focus

You can automatically or manually focus on subjects, or set focus to infinity. You can use One-shot AF to focus on 

subjects manually.

(1)

[Auto] 
Automatically focuses on the subject.

(2)

[Manual]
Use buttons ((4) and (5)) to manually adjust focus.

(3)

[Fixed at Infinity]
Fixes the focus near infinity.

(4)

[One-shot AF]
Use when the focus mode is set to [Manual]. When you click this, it will focus once using autofocus and then 

switch to manual focus.

(5)

Far and Near Buttons

Use to adjust focus when the focus mode is set to [Manual].

Focus will change while you hold the buttons down and stop when you release them.

Zooms in.

Zooms out.

Digital Zoom Range

Optical telephoto end icon

(1)
(2)
(3)

(4)

(5)