Canon Wi-Fi Adapter W-E1 Manual
81
Responding to Error Messages
Are the camera and the access point set to use the same
authentication method?
authentication method?
The camera supports the following authentication methods: [Open
system], [Shared key], and [WPA/WPA2-PSK] (p.36).
system], [Shared key], and [WPA/WPA2-PSK] (p.36).
Are the camera and the access point set to use the same
encryption key for authentication?
encryption key for authentication?
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is set on the camera (p.47).
characters. Make sure that the correct encryption key for
authentication is set on the camera (p.47).
If filtering by MAC address is active, is the MAC address of the
W-E1 used registered at the access point?
W-E1 used registered at the access point?
Register the MAC address of the W-E1 used at the access point.
The MAC address can be checked on the [General sett.] screen
(p.72).
The MAC address can be checked on the [General sett.] screen
(p.72).
Are the camera and the access point set to use the same
encryption method?
encryption method?
The camera supports the following encryption methods: WEP,
TKIP, and AES (p.36).
TKIP, and AES (p.36).
If filtering by MAC address is active, is the MAC address of the
W-E1 used registered at the access point?
W-E1 used registered at the access point?
Register the MAC address of the W-E1 used at the access point.
The MAC address can be checked on the [General sett.] screen
(p.72).
The MAC address can be checked on the [General sett.] screen
(p.72).
63: Wireless LAN authentication failed
64: Cannot connect to wireless LAN terminal