Netgear FVS318v2 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Manual De Referencia
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
7-12
Managing Your Network
M-10146-01
From the Main Menu of the browser interface, under the Maintenance heading, select the Router
Diagnostics heading to display the menu shown in
Diagnostics heading to display the menu shown in
.
Figure 7-9: Diagnostics menu
How to Enable Remote Management
Using the Remote Management page, you can allow a user or users on the Internet to configure,
upgrade and check the status of your NETGEAR Cable/DSL ProSafe VPN Firewall.
upgrade and check the status of your NETGEAR Cable/DSL ProSafe VPN Firewall.
1.
Log in to the firewall at its default LAN address of
http://192.168.0.1
with its default User
Name of
admin
, default password of
password
, or using whatever User Name, Password and
LAN address you have chosen for the firewall.
2.
Select the Allow Remote Management check box.
3.
Specify what external addresses will be allowed to access the firewall’s remote management.
Note: For security reasons, restrict access to as few external IP addresses as is practical.
Note:
Be sure to change the router's default password to a very secure password. The
ideal password should contain no dictionary words from any language, and should be a
mixture of letters (both upper and lower case), numbers, and symbols. Your password
can be up to 30 characters.
mixture of letters (both upper and lower case), numbers, and symbols. Your password
can be up to 30 characters.