Netgear RN31664E – ReadyNAS 316 6-Bay, 6x4TB Enterprise Drive Guía Del Software

Click the HTTPS button.

Configure the HTTPS settings as explained in the following table:

HTTPS cannot be disabled. The local admin page requires HTTPS to be enabled.

Enable HTTPS

Cannot be modified. Port 1, the value 443, is reserved for your ReadyNAS system.

Port 1

Set to a value in the range 1024–65535. Check to see if you must enable port forwarding of the
port you choose on the router. See the port forwarding instructions provided with your router.

Port 2

Configures the host name used for your ReadyNAS system to generate its SSL certificate and
then creates a new SSL certificate. We recommend that you update this field to match the current
IP address of your ReadyNAS system and then generate a new SSL certificate to avoid future
certificate errors from your web browser. In this scenario, it is best to use a fixed IP configuration
for your ReadyNAS system so that the certificate remains valid. Also, if the WAN IP address
configuration is DHCP, We recommend that you use a Dynamic DNS service to access the
ReadyNAS through a persistent fully qualified domain name provided by a DDNS service provider
rather than through an IP address.

SSL Key Host

Click the Apply button.
Your settings are saved.

Every ReadyNAS system generates a public and a private SSH key. Before another system can connect
to your ReadyNAS system through SSH, you must download and share the public key.

SSH must be enabled before you can download the key. You enable SSH in the same SSH Settings window
from which you download the key, so you can do both at the same time.

Log in to your ReadyNAS system.