Netgear FVS318N – Prosafe Wireless N VPN Firewall Prospecto
Introduction
11
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The Five Main Modes for Configuration Commands
For the configuration commands, there are five main modes in the CLI: net, security, system,
dot11, and vpn.
dot11, and vpn.
these modes, and each of these modes is described in detail in a separate chapter (see
through
).
The following table lists the main configuration modes, the configuration modes, the features
that you can configure in each configuration mode, and, for orientation, the basic web
management interface (GUI) path to the feature.
that you can configure in each configuration mode, and, for orientation, the basic web
management interface (GUI) path to the feature.
Table 3. Main configuration modes
__________________________CLI________________________ ___Web Management Interface (GUI)___
Main Mode
Submode
Feature That You Can Configure
Basic Path
Network configuration commands
net
ddns
Dynamic DNS
Network Configuration > Dynamic DNS
dmz
DMZ for IPv4
DMZ for IPv6
Network Configuration > DMZ Setup
ethernet
VLAN assignment to LAN interface
Network Configuration > LAN Setup
ipv6
IPv4 or IPv4/IPv6 mode
Network Configuration > WAN Settings
ipv6_tunnel
IPv6 tunnels
Network Configuration > WAN Settings
lan
IPv4 LAN settings and VLANs
LAN groups for IPv4
Secondary IPv4 addresses
Advanced IPv4 LAN settings
IPv6 LAN settings
Secondary IPv6 addresses
IPv6 LAN DHCP address pools
IPv6 prefix delegation for the LAN
Network Configuration > LAN Setup
radvd
IPv6 RADVD and pools for the LAN
IPv6 RADVD and pools for the DMZ
Network Configuration > LAN Setup
Network Configuration > DMZ Setup
routing
Dynamic IPv4 routes
Static IPv4 routes
Static IPv6 routes
Network Configuration > Routing
wan
IPv4 WAN (Internet) settings
IPv6 WAN (Internet) settings
MTU, port speed, and MAC
address
address
Network Configuration > WAN Settings
wan_settings
NAT or Classical Routing
Network Configuration > WAN Settings