Netgear FVS318N – Prosafe Wireless N VPN Firewall Prospecto

2.   

Overview of the Configuration 

Commands

This chapter provides an overview of all configuration commands in the five configuration 
command modes. The keywords and associated parameters that are available for these 
commands are explained in the following chapters. The chapter includes the following sections:

•     Network Settings (Net Mode) Configuration Commands 

•     Security Settings (Security Mode) Configuration Commands 

•     Administrative and Monitoring Settings (System Mode) Configuration Commands 

•     Wireless Settings (Dot11 Mode) Configuration Commands 

•     VPN Settings (VPN Mode) Configuration Commands 

Network Settings (Net Mode) Configuration Commands

Enter the net ? command at the CLI prompt to display the submodes in the net mode. The 
following table lists the submodes and their commands in alphabetical order:

ddns

Enable, configure, or disable Dynamic 
DNS (DDNS) service.

dmz

Enable, configure, or disable the IPv4 
DMZ.

Enable, configure, or disable the IPv6 
DMZ.

Configure a new or existing IPv6 DMZ 
DHCP address pool.

Delete an IPv6 DMZ DHCP address pool.

ethernet

Configure a VLAN for a LAN interface.

ipv6

Configure the IP mode (IPv4 only or 
IPv4/IPv6).