Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
300
|
Chapter 17. Syslog
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Show Logging Hosts
Select Monitoring > Logs > Sys Log Configuration. A screen similar to the following
displays.
displays.
Configure Logging for a Port
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure Logging for the Port
(Netgear Switch Routing) #config
(Netgear Switch Routing) (Config)#logging ?
buffered
Buffered (In-Memory) Logging Configuration.
cli-command
CLI Command Logging Configuration.
console
Console Logging Configuration.
host
Enter IP Address for Logging Host
syslog Syslog Configuration.
(Netgear Switch Routing) (Config)#logging host ?
<hostaddress>
Enter Logging Host IP Address
reconfigure
Logging Host Reconfiguration
remove
Logging Host Removal
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?
<cr> Press Enter to execute the command.
<port>
Enter Port Id