Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Guía De Administador
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
<cr> Press Enter to execute the command.
<severitylevel>
Enter Logging Severity Level (emergency|0, alert|1, critical|2,
error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
<cr> Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index IP Address Severity Port Status
----- ----------------- ---------- ---- -------------
1 192.168.21.253 alert 4 Active
Chapter 17. Syslog
|
301
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Configure Logging for the Port
1.
Select Monitoring > Logs > Sys Log Configuration. A screen similar to the following
displays.
displays.
2.
Enter the following information:
•
In the Host Address field, enter your host address 192.168.21.253.
•
In the Port field, enter 4.
•
In the Severity Filter list, select Alert .
3.
Click Add.