Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Advanced Configuration
118
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5.
Enter the name of the user in the Captive Portal User Name field.
6.
Click the Apply button.
The user is added.
7.
Select the user from the user list.
8.
Click the Edit button.
9.
In the User Password field, enter a password.
The user must use the assigned user name and password to gain access through the
captive portal.
captive portal.
10.
In the Away Time field, enter a time-out period between 0 and 1440 minutes.
The user is logged out if they are idle longer than the time that you enter.
11.
In the Max Bandwidth Upstream field, enter the maximum upstream bandwidth allowed to
the user, in megabits per second.
the user, in megabits per second.
This setting is optional.
12.
In the Max Bandwidth Downstream field, enter the maximum downstream bandwidth
allowed to the user, in megabits per second.
allowed to the user, in megabits per second.
This setting is optional.
13.
Click the Apply button.
Your settings are saved.
Upload a Custom Logo
If you want to use a custom logo on the splash page for captive portal, you must upload it
before you can select it. If you do not need to use a custom logo, skip this procedure.
before you can select it. If you do not need to use a custom logo, skip this procedure.
To upload a custom logo:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.