Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Initial Setup
15
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Log In to the Access Point
The default IP address of your access point is 192.168.0.100.
By default, the access point functions as a DHCP client. If the access point is installed in a
network that includes a DHCP server, the IP address of the access point is issued by the
DHCP server. You can find the IP address of the access point by accessing the DHCP server
or by using an IP address scanner utility. (Free IP address scanner utilities are available
online.)
network that includes a DHCP server, the IP address of the access point is issued by the
DHCP server. You can find the IP address of the access point by accessing the DHCP server
or by using an IP address scanner utility. (Free IP address scanner utilities are available
online.)
If you must configure the access point with a static IPv4 address, see the steps in
Note:
When the access point runs firmware version 3.5.6.0 or a later
version, by default, the access point is enabled for the cloud and
operates with a limited web management interface (only the
Configuration and Monitoring menu tabs display).
version, by default, the access point is enabled for the cloud and
operates with a limited web management interface (only the
Configuration and Monitoring menu tabs display).
Log In to the Access Point When It Is Directly Connected to Your Computer
To log in to the access point when it is directly connected to your computer:
1.
Change the IP address of your computer to an IP address in the 192.168.0.x subnet,
which is the subnet in which the access point’s default IP address is located.
which is the subnet in which the access point’s default IP address is located.
For example, change the computer’s IP address to 192.168.0.210.
2.
Connect your computer to the access point with an Ethernet cable.
3.
Open a web browser on your computer.
4.
In the address bar, enter http://192.168.0.100.
192.168.0.100 is the default IP address of the access point.