Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Management and Monitoring
62
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5.
Click the Choose File button and locate and select the backup configuration file (the file
name is config).
name is config).
IMPORTANT:
During the restoration process, do not try to go online, turn off the
access point, shut down the computer, or do anything else to the
access point until it finishes restarting!
access point, shut down the computer, or do anything else to the
access point until it finishes restarting!
6.
Click the Apply button to initiate the restoration process.
During the restoration process, the access point automatically restarts. The restoration
process typically takes about one minute. When the Test LED turns off, wait a few more
seconds before doing anything with the access point.
process typically takes about one minute. When the Test LED turns off, wait a few more
seconds before doing anything with the access point.
Restore the Access Point to the Factory Default Settings
You can restore the access point to the factory default settings by two methods that are
described in the following sections:
described in the following sections:
•
•
Note:
After you restore the factory default settings on the access point, the
following occurs:
* All custom configurations are lost.
* The login password is password.
* The default LAN IP address is 192.168.0.100.
* The DHCP client is enabled.
* The Access Point Name field is reset to the name printed on
the label on the bottom of the unit.
* All custom configurations are lost.
* The login password is password.
* The default LAN IP address is 192.168.0.100.
* The DHCP client is enabled.
* The Access Point Name field is reset to the name printed on
the label on the bottom of the unit.