Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Management and Monitoring
60
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5.
In the address bar, enter the IP address of the access point.
A login window opens.
6.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
7.
Select Maintenance > Upgrade > Firmware Upgrade TFTP.
8.
Specify the following information:
•
Firmware File Name. The name of the software file.
•
TFTP Server IP. The IP address of your TFTP server.
9.
Click the Apply button to initiate the upgrade process.
During the upgrade process, the access point automatically restarts. The upgrade
process typically takes several minutes. When the Test LED turns off, wait a few more
seconds before doing anything with the access point.
process typically takes several minutes. When the Test LED turns off, wait a few more
seconds before doing anything with the access point.
10.
Verify that the new software file was installed by selecting Monitoring > System.
The System page displays. The firmware version is shown in the Access Point
Information section of the page.
Information section of the page.
Manage the Configuration File or Reset to Factory
Defaults
Defaults
The access point settings are stored in the configuration file. You can save this file (back it
up) to a computer, restore it from a computer, or reset it to factory default settings, as
described in the following sections:
up) to a computer, restore it from a computer, or reset it to factory default settings, as
described in the following sections:
•
•
•
•