Netgear RD5200 (ReadyDATA 5200) – ReadyDATA 5200 System Empty Chassis with 10G (2 port SFP+ card) Guía Del Software
Configure the System Settings
66
ReadyDATA OS 1.4
8.
Select Properties.
The aggregation settings pop-up screen displays:
9.
Configure the general settings as explained in the following table:
Item
Description
Name
Use the default name or enter a custom name. The default name is aggrX, in
which X is a number in sequential and ascending order.
which X is a number in sequential and ascending order.
MTU
Enter the MTU in bytes. The default setting is 1500 bytes.
LACP Mode
LACP Timer
Hash Type
10.
Click the Apply button.
11.
Configure the switch or router to which the ReadyDATA is attached for channel bonding.
You configured these settings when you set up the aggregation interface. For
information about these settings, see the table in
information about these settings, see the table in
aggregation settings pop-up screen.)