Xerox WorkCentre 5865/5875/5890 Guía De Administador
Network Connectivity
44
Xerox
®
WorkCentre
®
5800/5800i Series Multifunction Printer
System Administrator Guide
Configuring DNS Settings at the Control Panel
Domain Name System (DNS) is a system that maps host names to IP addresses.
1.
1.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
2.
Touch Network Settings > TCP/IP Settings.
3.
Touch DNS Configuration.
a.
Touch Host Name.
b.
Type a host name.
c.
Touch OK.
d.
Touch Close.
Note:
If DHCP is enabled, your DHCP server can provide the Domain Name and the Requested
Domain Name.
e.
e.
Touch Domain Name.
f.
For Requested Domain Name, type the domain name.
g.
Touch OK.
h.
Touch Close.
4.
Touch DNS Servers.
a.
Touch Primary DNS Server, type the server address, then touch OK.
b.
Touch Alternate DNS Server #1, type the server address, then touch OK.
c.
Touch Alternate DNS Server #2, type the server address, then touch OK.
d.
Touch Close.
5.
Touch Close.
6.
To apply the settings, touch Finish.
Configuring IP Settings in Xerox
®
CentreWare
®
Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in Xerox
®
CentreWare
®
Internet Services. For details, see
Assigning a Network Address
on page 19.
Configuring IPv4
You can use IPv4 or IPv6 in addition to or in place of the other.
1.
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties > Connectivity > Setup.
2.
For Network, next to a connection type, click Edit.
Note:
The printer uses separate IPv4, IPv6, and DNS settings for wired and wireless network
connections. Before you configure wireless IP settings, install the Xerox
®
Wireless Network Interface,
then connect to a wireless network. For details, see
Connecting to a Wireless Network
on page 32.