Xerox WorkCentre 5865/5875/5890 Guía De Administador

Network Connectivity

Xerox

WorkCentre

5800/5800i Series Multifunction Printer

System Administrator Guide

For Protocol, select Enabled.

To allow the router to assign address prefixes, for Stateless Addresses, select Use Router Supplied

Prefixes.

To select how DHCP operates for IPv6, for Default Dynamic Host Configuration Protocol (DHCP)

Settings, select an option.

To enter the address manually, for Manual Address Options, select Enable Manual Address.

From the menu, select a router prefix, or type a new router prefix, then click Add.

10.

To save the new settings, click Apply.

Configuring DNS

Domain Name System (DNS) is a system that maps host names to IP addresses.
1.

In Xerox

CentreWare

Internet Services, click

Properties > Connectivity > Setup.

For Network, next to a connection type, click Edit.

Note:

The printer uses separate IPv4, IPv6, and DNS settings for wired and wireless network

connections. Before you configure wireless IP settings, install the Xerox

Wireless Network Interface,

then connect to a wireless network. For details, see

Connecting to a Wireless Network

on page 32.

For Configuration Settings, next to IP, click Edit.

To configure DNS, click Show DNS Settings.

For Requested Host Name, type a unique name for your printer. If the host name registers to the

DNS server successfully, the host name appears as a Verified Host Name. The default host name is

XRXxxx, where xxx is the MAC address of the printer.

Note:

If no host name appears, the host name did not register to the DNS server successfully.

Configure your DHCP server to perform updates on behalf of the DHCP clients.

For Requested Domain Name, type the name of the domain to which the printer is connected. If the

domain name registers to the DNS server successfully, the domain name appears as a Verified

Domain Name.

Note:

If no domain name appears, the domain name did not register successfully to the DNS server.

Configure your DHCP server to perform updates on behalf of the DHCP clients.

To allow users to see and connect to the printer using Bonjour, for Multicast DNS Registration, select

Enabled.

For Release this connection's DHCP leases and DNS registrations, select Enabled as needed. This

option allows the printer to send a release request to the DHCP and DNS servers. If the servers grant

the request, the servers release the current IP address and dynamic DNS names. The IP addresses

and DNS names renew immediately and when the printer is turned off.

For Additional DNS Server Addresses, type addresses as needed. If you have a DHCP server,

recognized addresses appear in the DNS Server Addresses list.

10.

For DNS Connection Timeout, type the time in seconds that the printer waits to connect to a DNS

server. After the timeout period, the printer attempts to connect to any additional DNS servers.

11.

To add the printer domain to the Domain Name Search List, for Append Device Domain, select

Enabled.