Xerox Phaser 8200 Prospecto

■

The maintenance drawer (labeled A) is locked because it contains hot ink that could 
cause burns. You cannot remove the maintenance drawer until the ink has cooled.

■

Close the front cover and wait at least five minutes for the ink to cool before removing 
the maintenance drawer from the printer.

■

Printing resumes when the maintenance drawer is unlocked and the cover is closed.

■

If the maintenance drawer is not installed, open the front cover and install the 
maintenance drawer (labeled A).

■

If the maintenance drawer is already there, pull out the drawer, make sure that the 
counter (orange piece labeled C2) is installed, and re-insert the maintenance drawer.

■

The Maintenance Kit is almost empty.

■

Order a replacement Maintenance Kit since the Maintenance Kit will need replacing 
soon.  See the web site:

■

The Maintenance Kit is depleted. Replace the Maintenance Kit to continue printing.

■

If the message remains after you installed a new kit, make sure that the new counter 
(the orange piece labeled C2) was correctly installed.

■

The 15-month service life will expire soon.

■

Order a replacement Maintenance Kit since the Maintenance Kit will need replacing 
soon.  See the web site:

■

The 15-month service life has expired.

■

Replace the Maintenance Kit now to prevent print quality problems.

■

An error occurred that may not be user-correctable.

■

Turn off the printer, wait at least 15 seconds, and then turn the printer back on. 

■

If the error is not cleared, write down the error number.

■

Access interactive troubleshooting assistance with PhaserSMART from the 

Technical Support link on the Troubleshooting tab.

■

If you have access to the internet, look up the error number on the infoSMART 
web page (see page 47) for possible corrective action.

■

If the error persists, call Customer Support with the error number.