Xerox Phaser 8200 Prospecto

■

Clear the jam. For detailed information about clearing jams, refer to the Phaser 8200 
Color Printer User Guide.

■

Make sure that paper or transparencies are installed correctly in the tray and that the 
tray switch is set correctly.

■

If the jam occurred because too much media was loaded in the tray, reduce the 
amount of media so it is below the fill line on the left side of the tray.

■

If the paper is wrinkled or curled, change the media; only use clean, undamaged 
paper.

■

If the jam occurred because the paper is too thick or too thin, use the recommended 
media instead; refer to the Phaser 8200 Color Printer User Guide or print the Paper 

Tips Page (from the 

 menu).

■

If an envelope has jammed because it was not loaded properly, pull out the jammed 
envelope, verify that the manual-feed slot is fully extended (by gently pushing it 
downward), and (when prompted by the front panel) insert an undamaged envelope 
in the manual-feed slot:

■

Insert only one envelope.

■

Make sure the envelope is aligned against the left side of the manual-feed slot 
with the flap side facing up. For more information about printing on envelopes, 
refer to the Phaser 8200 Color Printer User Guide.

■

Insert the envelope until it is pulled into the printer.

■

If a sheet of paper or a transparency has jammed because it was not loaded properly, 
Pull out the paper or a transparency, verify that the manual-feed slot is fully extended 
(by gently pushing it downward), and (when prompted by the front panel) insert an 
undamaged sheet in the manual-feed slot:

■

Insert only one sheet of paper or one transparency.

■

Make sure the sheet is aligned against the left side of the manual-feed slot. For 
more information about printing from the manual-feed slot, refer to the 
Phaser 8200 Color Printer User Guide.

■

Insert the sheet until it is pulled into the printer.