Craftsman 3100iSC Manual De Usuario
Using the Diagnostic Tool
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
47177 55
To erase OEM enhanced or ABS DTCs: Perform the Code
Retrieval procedure for OEM enhanced DTCs as described on
page 40 or for ABS DTCs as described on page 51. Wait until
the codes are displayed on the diagnostic tool’s LCD and then
proceed to step 3.
Retrieval procedure for OEM enhanced DTCs as described on
page 40 or for ABS DTCs as described on page 51. Wait until
the codes are displayed on the diagnostic tool’s LCD and then
proceed to step 3.
3.
Press and release the ERASE
button. A confirmation message shows
on the LCD display.
on the LCD display.
If you are sure you want to proceed,
use the UP
use the UP
and DOWN
but-
tons, as necessary, to highlight YES,
then press the ENTER
then press the ENTER
button.
- If you do not want to continue
with the erase process, use the
UP
UP
and DOWN
buttons,
as necessary, button to highlight
NO, then press the ENTER
NO, then press the ENTER
button.
4.
If you chose to erase DTCs, a “One
moment please…” message displays
while the erase function is in progress.
while the erase function is in progress.
If the vehicle’s engine is running, an
advisory message shows on the
diagnostic tool’s display. Turn the
engine OFF, then turn the ignition
back to ON. DO NOT start the
engine. Press the ENTER
advisory message shows on the
diagnostic tool’s display. Turn the
engine OFF, then turn the ignition
back to ON. DO NOT start the
engine. Press the ENTER
button to continue.
If the erase was successful, a
confirmation message shows on the
display. Press the M button to return
to the Main Menu.
confirmation message shows on the
display. Press the M button to return
to the Main Menu.
If the erase was not successful, an
advisory message shows on the
display indicating the erase request
was sent to the vehicle’s computer.
Press the M button to return to the
Main Menu.
advisory message shows on the
display indicating the erase request
was sent to the vehicle’s computer.
Press the M button to return to the
Main Menu.
Erasing DTCs does not fix the
problem(s) that caused the code(s)
to be set. If proper repairs to correct the problem that caused the
code(s) to be set are not made, the code(s) will appear again (and
the check engine light will illuminate) as soon as the vehicle is
driven long enough for its Monitors to complete their testing.
problem(s) that caused the code(s)
to be set. If proper repairs to correct the problem that caused the
code(s) to be set are not made, the code(s) will appear again (and
the check engine light will illuminate) as soon as the vehicle is
driven long enough for its Monitors to complete their testing.