Craftsman 3130eSC Manual De Usuario

 

 

 

 

 

 

 

®

 

„

 

If the erase was not successful, an 
advisory message shows on the 
display. 

-  To retry the erase process, verify 

that the Scan Tool is properly 
connected to the vehicle’s DLC and 
that the ignition is on. Use the UP 

 and  DOWN 

 buttons,  as 

necessary, to highlight Erase DTCs, 
then press the ENTER 

 button. 

-  To exit the record function, use the UP 

 and  DOWN 

 

buttons, as necessary, to highlight Back, then press the 
ENTER 

 button to return to the Record Live Data menu. 

  Put the engine in the operating condition 

that causes the DTC to set. 

„

 

If necessary, drive the vehicle until 
you reach the vehicle speed at 
which the problem occurs. 

  When the Scan Tool detects a fault that 

causes a DTC to set, it automatically 
records and saves approximately 20 
frames of Live Data information in its 
memory for each PID supported by the 
vehicle. 

„

 

All three LEDs will blink for three 
seconds to indicate that Live Data is 
being recorded, and a "One moment 
please..." message shows on the 
display. 

„

 

When recording is complete, a 
confirmation screen displays, asking 
if you would like to view the 
recorded data. Use the UP 

 and 

DOWN 

 buttons, as necessary, to 

select  Yes or No, as desired, then 
press the ENTER 

 button. 

„

 

If recording was not successful, an 
advisory message shows on the 
display. Press the ENTER 

 button 

to return to the Record Live Data 
menu.