Craftsman 3130eSC Manual De Usuario
Live Data Mode
LIVE DATA PLAYBACK
FixAssist
®
121
4.
When the problem occurs, press and
release the LD button.
All three LEDs will blink for three
seconds to indicate that Live Data is
being recorded, and a "One moment
please. . ." message shows on the
display.
seconds to indicate that Live Data is
being recorded, and a "One moment
please. . ." message shows on the
display.
When recording is complete, a
confirmation screen displays, asking
if you would like to view the
recorded data. Use the UP
confirmation screen displays, asking
if you would like to view the
recorded data. Use the UP
and
DOWN
buttons, as necessary, to
select Yes or No, as desired, then
press the ENTER
press the ENTER
button.
If recording was not successful, an
advisory message shows on the
display. Press the ENTER
advisory message shows on the
display. Press the ENTER
button
to return to the Record Live Data
menu.
menu.
If Yes is selected, the Scan Tool
enters "Playback" mode from which
you can view a frame-by-frame
playback of recorded Live Data (see LIVE DATA PLAYBACK on
page 121 for details). If No is selected, the display returns to the
Live Data Menu.
enters "Playback" mode from which
you can view a frame-by-frame
playback of recorded Live Data (see LIVE DATA PLAYBACK on
page 121 for details). If No is selected, the display returns to the
Live Data Menu.
5.
You can exit the "Record Live Data Mode" at any time by pressing
the SYSTEM MENU
button to return to the System Menu.
If desired, you can transfer the recorded Live Data information
to a personal computer with the use of optional software (see
instructions included with the software for more information).
to a personal computer with the use of optional software (see
instructions included with the software for more information).
LIVE DATA PLAYBACK
Once Live Data has been recorded, it is saved in the Scan Tool's
memory. You can view recorded Live Data immediately after recording
by selecting Yes from the Record Live Data confirmation screen (see
RECORDING (CAPTURING) LIVE DATA on page 117 for more
information), or you can view it later using the "Playback" function.
memory. You can view recorded Live Data immediately after recording
by selecting Yes from the Record Live Data confirmation screen (see
RECORDING (CAPTURING) LIVE DATA on page 117 for more
information), or you can view it later using the "Playback" function.
1.
With the Scan Tool not connected to a
vehicle, press the POWER/LINK
button.
The "To Link" screen shows on the
Scan Tool's display.
Scan Tool's display.
2.
Press and hold the LD button until the
Live Data Menu displays, then release
the LD button.
the LD button.