Craftsman 3130eSC Manual De Usuario
Additional Tests
SYSTEM TEST MENU
FixAssist
®
125
2.
A "One moment please..." message
displays while the request is sent to the
vehicle's on-board computer.
vehicle's on-board computer.
The Select Sensor screen displays.
The screen shows all O2 sensors
applicable to the vehicle under test.
The screen shows all O2 sensors
applicable to the vehicle under test.
If O2 sensor tests are not
supported by the vehicle under
test, an advisory message shows
on the Scan Tool's display. Press
the M button to return to the Main
Menu.
supported by the vehicle under
test, an advisory message shows
on the Scan Tool's display. Press
the M button to return to the Main
Menu.
3.
Use the UP
and DOWN
buttons,
as necessary, to highlight the O2 sensor
for which you wish to view test results,
then press the ENTER
for which you wish to view test results,
then press the ENTER
button.
4.
When test results have been retrieved,
data for the selected sensor test will
show on the Scan Tool's display.
show on the Scan Tool's display.
5.
When you have finished viewing the
retrieved test data, use the UP
and
DOWN
buttons, as necessary, to high-
light Back, then press the ENTER
but-
ton to return to the Select Sensor screen.
6.
Repeat steps 3 through 5 to view test results for additional sensors.
When you have finished viewing the retrieved test data use the UP
and DOWN
buttons, as necessary, to highlight Back on the
Select Sensor screen, then press the ENTER
button to return to
the System Test menu; or, press the M button to return to the Main
Menu.
Menu.
OBD Monitor Test
The OBD Monitor Test function retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
The Scan Tool does not perform the OBD monitor test, but
retrieves results from the most recently performed tests from
the on-board computer’s memory. You may retrieve OBD
monitor test results for only one test at any given time.
retrieves results from the most recently performed tests from
the on-board computer’s memory. You may retrieve OBD
monitor test results for only one test at any given time.
1.
From the System Test menu, use the
UP
and DOWN
buttons, as
necessary, to highlight OBD Monitor
Test, then press the ENTER
Test, then press the ENTER
button.