Craftsman 3130eSC Manual De Usuario
![Craftsman](https://files.manualsbrain.com/attachments/64d6cde975b4a3b8237659498f8efc460daae72a/common/fit/150/50/86e49e5c9c65cca0b47572681506b669ff7da60b30985782de01b2359a72/brand_logo.png)
Additional Tests
SYSTEM TEST MENU
126 FixAssist
®
2.
A “One moment please. . .” message
displays while the request is sent to the
vehicle’s on-board computer.
vehicle’s on-board computer.
The Select Test screen displays.
The screen shows all tests
applicable to the vehicle under test.
Refer to the vehicle’s service repair
manual for information related to
non-continuous tests.
The screen shows all tests
applicable to the vehicle under test.
Refer to the vehicle’s service repair
manual for information related to
non-continuous tests.
If OBD monitor tests are not
supported by the vehicle under test,
an advisory message shows on the
Scan Tool's display. Press the M
button to return to the Main Menu.
supported by the vehicle under test,
an advisory message shows on the
Scan Tool's display. Press the M
button to return to the Main Menu.
3.
Use the UP
and DOWN
buttons,
as necessary, to highlight the desired
test, then press the ENTER
test, then press the ENTER
button.
4.
When test results have been retrieved,
data for the selected test will show on
the Scan Tool’s display. The display
shows the following information:
the Scan Tool’s display. The display
shows the following information:
Test ID number
Module ID number
Component ID number
Min or Max test limit
Only one test limit, either Min or Max, is shown for any
given test.
given test.
Test Value and status
Status is calculated by the Scan Tool by comparing the Test
Value against the displayed test limit (either Min or Max).
Status is shown as either Low, High or OK.
Value against the displayed test limit (either Min or Max).
Status is shown as either Low, High or OK.
5.
Repeat steps 3 and 4 to view test results for additional tests. When
you have finished viewing the retrieved test data, use the UP
and DOWN
buttons, as necessary, to highlight Back on the
Select Test screen, then press the ENTER
button to return to the
System Test menu; or, press the M button to return to the Main
Menu.
Menu.
EVAP Test
The EVAP Test function lets you initiate a leak test for the vehicle's
EVAP system.
EVAP system.