Craftsman DD2101 Manual De Usuario

6 – English

Chuck ...........................................................1/2 in. Keyless
Motor ...............................................................19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)

No Load Speed ....................... 0-375/0-1,600 r/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ................................................................... 465 in.lb.

See Figure 1, page i.
The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual 
as well as a knowledge of the project you are attempting. 
Before use of this product, familiarize yourself with all 
operating features and safety rules.

Your drill is equipped with an auxiliary handle for ease of 
operation and to prevent loss of control.

Bits provided with the drill-driver can be placed in the 
storage area, located on the base of the tool.

(FORWARD/REVERSE/CENTER LOCK)
Your drill-driver has a direction of rotation (forward/
reverse/center lock) selector located above the switch 
trigger for changing the direction of bit rotation. Setting 
the direction of rotation selector in the 

OFF (center lock) 

position will lock the switch trigger to help reduce the 
possibility of accidental starting when not in use.

The LED worklight illuminates when the switch trigger is 
depressed. This provides extra light for increased visibility.

The keyless chuck allows you to hand-tighten or release 
the drill bit in the chuck jaws. 

A level is located on the rear of the motor housing to help 
keep the drill bit level during use.

Your drill has a 24-position clutch. The torque adjustment 
ring can be turned to select the right amount of torque for 
your application.

The two-speed gear train is designed for drilling or driving 
at 

LO (1) or HI (2) speeds. A slide switch is located on top 

of your drill for selecting either 

LO (1) or HI (2) speed.

The variable speed switch trigger delivers higher speed 
with increased trigger pressure and lower speed with 
decreased trigger pressure.

Drill-Driver
Auxiliary Handle Assembly
Double-ended Bit (2)
Operator’s Manual

If any parts are damaged or missing do 

not operate this product until the parts are replaced. 
Use of this product with damaged or missing parts 
could result in serious personal injury.

WARNING: 

Do not attempt to modify this tool 

or create accessories not recommended for use 
with this tool. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

This product requires assembly


  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list 
are included.

Do not use this product if any parts 

on the Packing List are already assembled to your 

product when you unpack it. Parts on this list are not 

assembled to the product by the manufacturer and 

require customer installation. Use of a product that 

may have been improperly assembled could result in 

serious personal injury.



  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.



  Do not discard the packing material until you have 

carefully inspected and satisfactorily operated the tool.



  If any parts are damaged or missing, please call 

1-800-932-3188 for assistance.